Impact response of waste poly ethylene terephthalate (PET) composite plate
[ X ]
Tarih
2017
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Springer New York LLC
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Poly ethylene terephthalate (PET) is considered one of the most important engineering polymers for the last two decades due to its rapid growth of usage, aesthetic appearance, good light transmittance, and smooth surface. It is highly preferable for the food and soft drink bottle packaging industry because of its low gas permeability and recycling potential. For this reason, vast amount of PET’s is used daily and mandates an effective recycling process. The recycling of PET can be performed using two different methods, which are chemical and mechanical methods. In this study, chemical recycling method was chosen as a recycling method. Waste PET bottle evaluated as a binder for composite materials. Obtained glycolized products and binder are characterized by OH number (hydroxyl), acid number and FTIR. Then E-glass/recycle resin composite plates were manufactured via Vacuum Assisted Resin Transfer Molding (VARTM). Drop weigh tests were applied to measure the general mechanical and damage behavior of these composites. © The Society for Experimental Mechanics, Inc. 2017.
Açıklama
Annual Conference on Experimental and Applied Mechanics, 2016, 6 June 2016 through 9 June 2016,
Anahtar Kelimeler
Composite, Damage Analysis, Glycolysis, Impact Response, Polyethylene Terephthalate, Recycle
Kaynak
Conference Proceedings of the Society for Experimental Mechanics Series
WoS Q Değeri
N/A
Scopus Q Değeri
N/A
Cilt
7
Sayı
Künye
Bilici, İ., Kurşun, A.,Deniz, M. (2017). Impact response of waste poly ethylene terephthalate (PET) composite plate. Annual Conference on Experimental and Applied Mechanics, 2016, 6 June 2016 through 9 June 2016, Springer, Cham.
