Deep drawing of polymer coated metal sheets

Basit Öğe Kaydı
dc.authorscopusid57190436454
dc.authorscopusid57211682745
dc.contributor.authorErdin, Muhammed Emin
dc.contributor.authorÖzdilli, Özgür
dc.date.accessioned2021-11-01T14:51:44Z
dc.date.available2021-11-01T14:51:44Z
dc.date.issued2019
dc.departmentHitit Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü
dc.departmentHitit Üniversitesi, Teknik Bilimler Meslek Yüksekokulu, Makine ve Metal Teknolojisi Bölümü
dc.description.abstractIn the present study, the deep drawing of polymer coated metallic sheets were experimentally investigated to reduce friction and increase manufacturing efficiency without using a lubricant. Coating of metal sheets with a polymer material before the deep drawing process provides numerous other advantages such as long service life, decorative appearance, corrosion protection, prevention of excessive abrasion. In the experiments, deep drawing ratio, blank holder pressure, and punch speed parameters were varied at various intervals and the obtained values were evaluated via graphs. Experiments of the uncoated metal sheets were conducted as well as the coated ones to compare the results. Results of this study showed that the polymer coating improved the surface quality of the test specimens. As a result of this improvement; the average molding forces decreased, obtained deep drawing ratios increased and defects such as tearing and wrinkling were alleviated by coating metal sheets with polymer material compared to uncoated sheets. © 2019, KSME & Springer.
dc.description.sponsorshipThis research has been realized using the support of Scientific Research Projects Department, Hitit University, Turkey. This support which obtained from projects MUH19004. 17.002 and MUH19004.16.006 is gratefully acknowledged.en_US
dc.identifier.citationErdin, M. E., & Ozdilli, O. (2019). Deep drawing of polymer coated metal sheets. Journal of Mechanical Science and Technology, 33(11), 5383-5392.
dc.identifier.doi10.1007/s12206-019-1032-4
dc.identifier.endpage5392en_US
dc.identifier.issn1738-494X
dc.identifier.issue11en_US
dc.identifier.scopus2-s2.0-85074814698
dc.identifier.scopusqualityQ2
dc.identifier.startpage5383en_US
dc.identifier.urihttps://doi.org/10.1007/s12206-019-1032-4
dc.identifier.urihttps://hdl.handle.net/11491/6291
dc.identifier.volume33en_US
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.institutionauthorErdin, Muhammed Emin
dc.institutionauthorÖzdilli, Özgür
dc.language.isoen
dc.publisherKorean Society of Mechanical Engineers
dc.relation.ispartofJournal of Mechanical Science and Technology
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectAverage molding forceen_US
dc.subjectDC01 steelen_US
dc.subjectDeep drawingen_US
dc.subjectPolymer coatingen_US
dc.subjectSheet metal formingen_US
dc.subjectSurface roughnessen_US
dc.titleDeep drawing of polymer coated metal sheets
dc.typeArticle

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Makale Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu