Abrasive wear, structure, and mechanical aspects of Al–Al2O3 composites fabricated using various mixing media during P/M routes

Basit Öğe Kaydı
dc.authorid0000-0001-9931-0778
dc.contributor.authorKurt, Halil İbrahim
dc.contributor.authorArık, Halil
dc.contributor.authorBağcı, Cengiz
dc.date.accessioned2019-05-13T08:59:05Z
dc.date.available2019-05-13T08:59:05Z
dc.date.issued2016
dc.departmentHitit Üniversitesi, Mühendislik Fakültesi, Metalurji ve Malzeme Mühendisliği Bölümü
dc.description.abstractThe effects of mixing method during powder metallurgy (PM) routes on the abrasive wear behavior of Al–Al2O3p composite materials is investigated. For this purpose, starting Al powders with a constant volume fraction of 10% Al2O3p are mixed in a ball-mill, Turbula, and high-energy attritor. Block samples for wear tests are prepared by using the PM process. A pin-on-disc apparatus is used for determining the wear rate. Comparative analyses are based mainly on the wear results, hardness, microstructural evaluation of the samples, and sintering densities. It is established that the samples mixed in the Turbula attritor exhibite the highest density and the lowest hardness. It is revealed that the samples mixed with Turbula have the lowest wear rate, whereas those mixed in the high-energy attritor have the highest wear rate. It is established that the composites demonstrate their optimal characteristics in the samples mixed in the ball-mill attritor. © 2016, Springer Science+Business Media New York.
dc.identifier.citationKurt, H., Arık, H., Bağcı, C. (2016). Abrasive wear, structure, and mechanical aspects of Al–Al2O3 composites fabricated using various mixing media during P/M routes. Powder Metallurgy and Metal Ceramics, 55(3-4), 141-151.
dc.identifier.doi10.1007/s11106-016-9789-9
dc.identifier.endpage151en_US
dc.identifier.issn1068-1302
dc.identifier.issue03.Apren_US
dc.identifier.scopusqualityQ2
dc.identifier.startpage141en_US
dc.identifier.urihttps://doi.org/10.1007/s11106-016-9789-9
dc.identifier.urihttps://hdl.handle.net/11491/1248
dc.identifier.volume55en_US
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherSpringer New York LLC
dc.relation.ispartofPowder Metallurgy and Metal Ceramics
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectMetal Matrix Compositesen_US
dc.subjectParticle Reinforcementen_US
dc.subjectPowder Processingen_US
dc.subjectWearen_US
dc.titleAbrasive wear, structure, and mechanical aspects of Al–Al2O3 composites fabricated using various mixing media during P/M routes
dc.typeArticle

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu