Production of metal matrix composites by the vortex method and investigation of the effect of changing casting temperature on particles ratio of product-composite

Basit Öğe Kaydı
dc.contributor.authorÖzdin, Kamil
dc.date.accessioned2019-05-13T08:57:40Z
dc.date.available2019-05-13T08:57:40Z
dc.date.issued2014
dc.departmentHitit Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü
dc.description.abstractIn this study, Al-2011 alloyed and Al2O3 particle-reinforced metal matrix composite (MMCs) were produced by using the Vortex method. Immediately after pouring composite to the mold and before full solidification, the porosity inside composite has decreased to accepted values by applied pressure. Product-composites were produced with approximately 8, 16, and 24 vol% Al2O3 particles. The effects of casting temperature were investigated on production of MMCs at targeted particle ratios. In addition, the effects of increased particle ratio to hardness were tested. According to the results of experiments, when casting temperature changes, the particle ratio of product-composite and rest-composite (the composite that remains at the bottom of pot after casting) also changes. As the difference between casting temperature and proper casting temperature grows, the difference between those rates increases. Moreover, it can be clearly seen that the increasement at composite's particle ratio also cause to an increase at hardness. © 2012, Society for Experimental Mechanics.
dc.identifier.citationÖzdin, K. (2014). Production of metal matrix composites by the vortex method and investigation of the effect of changing casting temperature on particles ratio of product-composite. Experimental Techniques, 38(6), 16-20.
dc.identifier.doi10.1111/j.1747-1567.2012.00840.x
dc.identifier.endpage20en_US
dc.identifier.issn0732-8818
dc.identifier.issue6en_US
dc.identifier.scopusqualityQ2
dc.identifier.startpage16en_US
dc.identifier.urihttps://doi.org/10.1111/j.1747-1567.2012.00840.x
dc.identifier.urihttps://hdl.handle.net/11491/982
dc.identifier.volume38en_US
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherBlackwell Publishing Inc.
dc.relation.ispartofExperimental Techniques
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectCasting Temperaturesen_US
dc.subjectMetal Matrix Compositesen_US
dc.subjectParticle Ratioen_US
dc.subjectVortex Methoden_US
dc.titleProduction of metal matrix composites by the vortex method and investigation of the effect of changing casting temperature on particles ratio of product-composite
dc.typeArticle

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu