Comparison with some porous materials and the effects of powder filling on breakage parameters of diatomite in dry ball milling

Basit Öğe Kaydı
dc.authorid0000-0003-4098-959X
dc.contributor.authorDeniz, Vedat
dc.date.accessioned2019-05-10T09:39:57Z
dc.date.available2019-05-10T09:39:57Z
dc.date.issued2011
dc.departmentHitit Üniversitesi, Mühendislik Fakültesi, Polimer Mühendisliği Bölümü
dc.description.abstractIn this study, a comparison of breakage parameters with some porous materials (pumice, trass, and amorphous silica) and the effects on breakage kinetics of powder filling of diatomite were investigated on at batch grinding conditions. For this purpose, first, standard Bond grindability tests were performed for four porous samples. Second, eight different mono-size fractions of all samples were carried out between 1.7mm and 0.106mm formed by a a?2 sieve series. Then, Si and Bi,j equations were determined for the size distributions at different grinding times, and the model parameters (Si, aT, ?, ?, ?j, and ?) were tested for four different porous materials. Finally, model parameters were discussed for four different powder filling (3.5, 7, 10.5, and 14%) of diatomite samples. From the results of test, the validity of the relationships between Bond grindability and breakage parameters has been not confirmed with good correlation coefficients. The reason of this negative result could be attributed to different of the geological origin of porous materials. In addition, the results of the effect of powder filling on the grinding were found different than other investigators. Copyright © Taylor & Francis Group, LLC.
dc.identifier.citationDeniz, V. (2011). Comparison with some porous materials and the effects of powder filling on breakage parameters of diatomite in dry ball milling. Particulate Science and Technology, 29(5), 428-440.
dc.identifier.doi10.1080/02726351.2010.509855
dc.identifier.endpage440en_US
dc.identifier.issn0272-6351
dc.identifier.issue5en_US
dc.identifier.scopusqualityQ2
dc.identifier.startpage428en_US
dc.identifier.urihttps://doi.org/10.1080/02726351.2010.509855
dc.identifier.urihttps://hdl.handle.net/11491/811
dc.identifier.volume29en_US
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherTaylor and Francis
dc.relation.ispartofParticulate Science and Technology
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectBreakage Parametersen_US
dc.subjectDiatomiteen_US
dc.subjectGrindingen_US
dc.subjectPorous Materialsen_US
dc.subjectPowder Fillingen_US
dc.titleComparison with some porous materials and the effects of powder filling on breakage parameters of diatomite in dry ball milling
dc.typeArticle

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu